SW100 Swing Door Operator
Low energy
The SW100 is an electromechanical
operator and has been developed to comply with
North American and European standards and
requirements for low-energy power operated doors.
Silent and smart
The SW100 is designed for silent
applications with high intelligent functions. Safe,
reliable and quiet operation make it the ideal
choice for doors in healthcare, residential, office
and public service environments where both low noise
and ease of access are important.
It includes smart functions such as “Push-and- go”,
which opens the door automatically when
manually pushed from the closed position, and
“Power Assist”, providing motorized assistance
when the door is pulled opened by hand. The
smart control unit offers added-value features like
double-door controls and monitored battery backup
for convenience. Other added-value features
are smart lock functions for security, monitored
sensors and low-energy consumption.
Technical specifications
Power supply 100-240 V AC +10/-15%,
50/60Hz
Power consumption max. 75 W
Auxiliary voltage 24 V DC, max. 400 mA
Monitored battery
backup unit
24 V DC
Electromechanical locking
connection
12 V DC max 500 mA or
24 V DC max 250 mA
Ambient temperature -20°C to +45°C
Relative humidity (non-condensing) max 85%
Max recommended Inertia J
For PUSH = 45 kgm²
For PULL = 16 kgm²
J = Door weight x (Door width)²/3
Class of protection IP20 - to be installed internally or
externally with suitable weather protection
The SW100 complies with
- EN 16005
- EN 60335-2-103
- IEC 60335-1
- IEC 60335-2-103
- UL 325
- UL 228
- UL 10C
- EN 1634-1
Design
The operator works electromechanically. It opens
with motor and closes with motor and spring.
The opening and closing speeds can be varied
individually. The motor, control unit, gear box
and spring are combined into a compact unit
and mounted within the cover. The operator is
connected to the door leaf with either a pushing or
a pulling arm system.
Arm systems
PUSH – Pushing arm system. The operator is
installed on the wall on the opposite side of the
door swing. Door opening angle adjustable up to
110°.
PULL – Pulling arm system. The operator is installed
on the wall on the same side as the door swing.
Door opening angle adjustable up to 110°.
ST-V/H – Pulling arm system. Used in windy
conditions when the operator is installed on the
wall on the same side as the door swing. Door
opening angle adjustable up to 95°.
Shaft extensions – Allow the operator to be fitted
higher on the wall or the arm lower on the door leaf.
Models
Single operator – one drive unit and one control
unit fitted under a cover
Double operator – two drive units with control
units fitted under the same cover for operation
of
two doors
