Trimec ES9000 Pre-Load Strike PTO/PTL
Application
The ES9000 has been designed to suit the harshest commercial environments, and has the unique feature of the ability to operate with up to 25kg of pre-load pressure on the keeper.Pre-load is a common condition that caused by pulling on a door before it unlocks, the weight of warped or drooping doors, seals on fire doors, or by differential air pressure created when heating and cooling systems are in use.
Standard features include multi voltage10 - 30Vdc and field changeable settings from fail safe to fail secure.
Built to last, this is a premium locking solution that has been tested in excess of 2 million cycles and boasts unique features like no other available on the market today.
Specification
- Operates under pre load up to 25kg
- Easy field selectable fail safe/fail secure
- Multi voltage 10-30Vdc
- 1300kg holding force
- 2.5 million cycles endurance rating
- Latch keeper is significantly quieter in operation
- Weather resistant (IP54)
- Built in protection diode
- Mounting tabs as standard
- Non handed
- Tricare 5 Year Warranty
- CE marked to EMC Directive
Finish
- High traffic areas
- Doors subjected to side load (pre load)
- Fire rated door sets (Australian Specific)
- Open in/open out doors
- Suitable for use with all access control systems
- High traffic areas
- Doors subjected to side load (pre load)
- Fire rated door sets (Australian Specific)
- Open in/open out doors
- Suitable for use with all access control systems
Standards
Voltage
10 - 30Vdc Current
250mA @12Vdc - 130mA @24Vdc Solenoid Solenoids are rated for continuous use. Electrical protection Polarity and back EMF protected Monitoring Solenoid Monitor - 1 amp NO/NC microswitch
Door / Latch - 1 amp NO/NC microswitch Holding Force
1300kg static strength rating Endurance 1,200,000 cycles endurance rating @ 25kg pre-load
2,500,000 cycles general durability without pre-load conditions Latching
Suitable for 15mm latch with 3mm door gap Environment Operational temperature range -20°C to +60°C Body Solid Stainless Steel Construction Keeper Stainless Steel
Voltage | 10 - 30Vdc |
Current | 250mA @12Vdc - 130mA @24Vdc |
Solenoid | Solenoids are rated for continuous use. |
Electrical protection | Polarity and back EMF protected |
Monitoring | Solenoid Monitor - 1 amp NO/NC microswitch Door / Latch - 1 amp NO/NC microswitch |
Holding Force | 1300kg static strength rating |
Endurance | 1,200,000 cycles endurance rating @ 25kg pre-load 2,500,000 cycles general durability without pre-load conditions |
Latching | Suitable for 15mm latch with 3mm door gap |
Environment | Operational temperature range -20°C to +60°C |
Body | Solid Stainless Steel Construction |
Keeper | Stainless Steel |
Trimec ES9000 Pre-Load Strike
- Brand: Trimec
- Product Code: Trimec ES119001-000 PTO/PTL
- Availability: In Stock
-
£512.75
- Ex Tax: £427.29